valves

THM – 4WREE – Proportional Valves Direct-acting 4/2 and 4/3 Proportional Directional valves with electrical position feedback with/without integrated amplifier Size: 6 and 10 Component series: 2X Maximum operating pressure: 315 bar Maximum flow: 80 l/min (size NG6), 180 l/min (size NG10)

THM – 4WRKE – Proportional Valves Features: Pilot operated proportional directional valve, main spool with electrical position feedback. Bottom plate installation: installation face with ISO4401 (Size 10 to 32) Used to control the flow and direction. Electrical position feedback on main spool. Spring centered main spool. Integrated control electronics. Threaded type replaceable solenoid coil. Actuation via proportional solenoids stage.

THM – PV-3 Series – Proportional valves Proportional Valves For Mobile and Industrial Hydraulic applications Max. flow: 140 l/min Max. pressure: 350 bar

THM – PV-4 Series – Proportional valves Proportional Valves For Mobile and Industrial hydraulic applications. Max. flow: 140 l/min Max. pressure: 350 ba

THM – EFBG – Proportional Pressure Relief And Flow Valves Pilot Operated Features: Pressure and flow is proportional to the input signal of the proportional solenoids. This proportional valve adopts two electrical loops to control pressure and flow of hydraulic system respectively. The power losses is very low and overall efficiency high, hence reduced power consumption. Using very small pressure drop to track load pressure and control the pump pressure. This relief and flow control valve is energy saving type that provide flow and pressure as per programmed for actuator / drive. It is an high efficiency and energy-saving valve.

Shut off Valve, Sub Plate Mounting | MHSLB25

Shut off Valve, Sub Plate Mounting | MHSLB**

Reverse Check Valve, Screw in Cartridge | KSD

Check Valves | RHD/RHZ/RHV/RHF

Throttle/Check Valves, Inline | TCG/TC

Ball Valves | BV-G

Quick Release Couplings | QRC

Electro-Hydraulic Flow Control valves

Electro-Hydraulic Relief & Flow Control Valves

Electro-Hydraulic Direction & Flow Control Valves

Proportional Electro-Hydraulic Relief Valves

Proportional Electro-Hydraulic Flow Control Valves

Proportional Electro-Hydraulic Flow Control Valves

SD25 -High flow sectional valve This valve is assembled on large container Fork Lifts and Stackers, all Terrain Cranes, Garbage Compactors, Drain Machines, large Agricultural Loaders and Earth Moving machines. - Type "Y" free flow gallery - SAE flange arrangement - Fitted with a main pressure relief valve and a load check valve on every working section - Available with parallel or series circuit. - Optional carry--over port. - A wide range of service ports and circuit valves - Manual, pneumatic, hydraulic, electro-hydraulic, and remote with flexible cable controls. Nominal Flow Rating l/min - (US gpm): 240 (63) Max. Pressure bar - (psi): up to 315 (4600) Number of Sections: 12 Pitch mm (in): 62 (2,44)

Monoblock one-section valve-SD4 Available only in one‑section configuration, the SD4 valve is normally used in Wood Splitter, small Dumpers, small‑sized Tractors and Workshop Presses. Compact size, robust construction and low cost are the main features of this valve. - No check valve - Manual, electric on/off and pneumatic controls. Nominal Flow Rating l/min - (US gpm): 45 (12) Max. Pressure bar - (psi): 250 (3600) Number of Sections: 1

Manifolds For Directional Control Valves - ( 1P 02155* ) Designed specially for multistation directional control valves, CETOP- RP 35 H size 3. Number of stations vary from minimum 2 to maximum 10.

Joystick Controlled - 4JP 06 4JP 06 Joystick Controlled Pilot Oil Unit is a Manual Joystick control valve, meant for providing variable pilot pressure to the hydraulic components like Proportional Pilot Operated Directional Control Valves, Pumps and motors etc., which need variable pilot pressure to control their outputs. The valve has two pairs of outlets, which can be operated independently or in tandem. Depending upon the Joystick tilt, the valve provides variable pressure to one or two of its outlets at a time. The pilot pressure can be regulated in the pressure range of 6 to 19 bar. Currently we are supplying this valve to All Customers

Cover For fitting directional spool valve (Solenoid controlled) - CVC*DE

Cartridge Valves - CV 16 to CV 40 These valves are suitable for mounting in manifold cavities machined as per ISO 7368. By selecting suitable cartridge and cover, it is possible to achieve functions like Check valve, Directional control valve, Unloading valve, Throttle valve etc. These valves offer fast response, have very low internal leakage and can handle very large flow rates. The cartridges are available with two area ratios.

Prefill valve ( PV 32 - 80 ) Intended for prefilling and exhausting of large hydraulic cylinders. Can be used as anticavitation check valves. Decompression feature is optional up to size 80.

Check Valve, SCREW-IN CARTRIDGE - KSC / KSD Two port screw-in cartridge valves that are designed to fit in a cavity confirming to ISO 7789 : 1998 (E). These are seat type vales, available in four different sizes and with five different cracking pressure in each size. Check valves allow free flow in one direction while providing leak-free closure in reverse direction. Features Fits into ISO 7789 : 1998 (E) cavity. (other cavities available on request) Cartridge construction for compact integrated manifolds Economical Quick and Easy field service, reduces down time Valve Bodies available on request

Shuttle Valves - SL Seat type construction. Automatically connects it's P port to either A or B depending upon whichever of the two ports is at higher pressure level. Isolates port A and B from each other. Port P gets connected to tank, only if, port A and port B are connected to tank. Available both in Threaded and Sub-plate type.

Check Valve - C These seat type valves allow free flow from port A to port B and give leak-proof closure in opposite direction. Available as inline mounting or Sub-plate mounting as per factory & ISO standards.

Hand Pumps with Rotary Directional Control Valves - HP*-D Hand pump model HP*-D are compact heavy duty pumps designed for industrial applications like operating small presses, fixtures as well as providing source of oil for hydraulically operated emergency equipments. These hand pumps are equipped with integral Rotary Directional Control Valve with two outlet ports for switching of the flow between the two sides of a double acting cylinder. The Rotary valve has pressure holding ability.

Pilot Operated Pressure Relief Valves - PPR Pilot operated seat type valve. High flow handling capacity, low pressure override, remote controllability and solenoid unloading possibility are the main features of these valves. Bodies available with threaded ports or sub-plate mounting style.

Pilot Operated Pressure Reducing Valves (Cartridge Type) - PPM 06K Two stage Spool type Relief / Reducing Valve Cartridge Low pressure override due to larger flow area. Two options for pressure adjustment, - With set screw and lock nut. - With hand knob and lock nut.

Pilot Operated Pressure Relief Valves (Cartridge Type) - PPR 06K Two stage Spool type Relief / Reducing Valve Cartridge Low pressure override due to larger flow area. Two options for pressure adjustment, - With set screw and lock nut. - With hand knob and lock nut. Internal drain valves can be converted to external drain.

Direct Operated Pressure Relief Valve - DPR Direct acting with guided cushioned poppet. Available in Cartridge, Threaded and Sub plate types.

Pressure compensated flow control valve - PF Pressure compensated. Check valve option for reverse-free flow. Four rotations of hand knob to facilitate the setting with ease. Thumb screw provision to retain valve setting. Stroke limiter available as an option.